Circuit Diagram And Component Details Of Very Sensitive Pizeo Electricity Generator

Hello MY all Friends…!
first i want to thanks for watching our video and subscribing our channel.

Finally i made this video for you all friends. in this video you find every thing about this circuit.

Circuit Diagram
Component details

here is component details

1. Breadboard

2. Capacitor (1, 10, 22, 47, 100, 150uF)

3. LED

4. Jumper Wire

5. Switch

6. Pizeo Plate

7. Rectifier (MIC DB 107)

8. Thermochol form

Here is some link of required components

Pizeo plate –

Pizeo electricity circuit –

Please Follow for more new Projects and Updates …!

Blogger –

Facebook Page –

Contact Details


Hope you Friends Like this Video

Thank you

Piezoelectric materials generate electricity when they are mechanically deformed. In this video we show how this can be used to make a simple circuit that stores the energy in a capacitor and lights a LED.

Capacitor is 20 uF @ 25 volts and resistor is 2.2 k.

Did you know that you can produce electricity by just walking? Here’s my documentation of the gizmo that I’ve conceptualize over the years. It’s a shoe insole that generates electricity solely by walking!
____________Read More….______________
Curious what my projects are? Feel free to visit:
– GSF 2014 Entry:
– Instructables:

This is my entry for the “2014 Google Science Fair”

The results showed that it was possible to charge a powerbank after playing 2 straight hours of basketball. Though the output was a bit faint but showed signs that the project can be developed.

Reflection/ Future Design:
People’s first impression upon seeing this project was like “Why in the world would I like to charge my phone with a shoe?”. Yes it sounds very ridiculous and impractical, on the contrary the project has opened doors for new designs for technology. The project is ideal for smart clothing, sport apparels that sync to your smart device/phone/watch wirelessly. It can supply an independent power for on-board chips, chips to be mounted on smart shoes/ apparels.

Author/ Editor/ Entrant: Angelo Casimiro
Background Music: The XX – Intro (Itunes Free Version)

Piezo power generator!!

It is the shoes generator.

I don`t use a battery.

Make the electricity only with a pressure.

I used the twins piezo 1 and bridge diode 1 and LED 8.

Project Description: Piezo footstep e-generator helps in generation of electric field from applied pressure. The project creates electricity from the footpath of human body.

Value: It is used in subways, malls, theatres, stadium etc.

Drum Controller with Arduino and Prosessing Just prototyping to learn this things…

Namaskaar Dosto, is video mein maine aapse Piezoelectricity aur Piezoelectric effect ke baare mein baat ki hai, aap sabhi ise daily use karte hai, magar shayad aapko iske baare mein nahi pata ho, mujhe umeed hai ki aapko piezoelectricity ke bare mein yeh video pasand aayegi. KeepVid Pro: KeepVid: Share, Support, Subscribe!!! Subscribe: Youtube: Twitter: Facebook: Facebook Myself: Instagram: Google Plus: About : Technical Guruji is a YouTube Channel, where you will find technological videos in Hindi, New Video is Posted Everyday 🙂

Basic Electronics: Surface Mount Components Kit – 555 Roulette

A simple kit, but quite difficult to assemble because of the very tiny surface mount components.

1Pcs Electronic Lucky Rotary Suite DIY Kits Production Parts And Components New
This one shows SMD components:

Electronic Lucky Rotary Suite wheel of Fortune DIY Kit Electronic Dice Arduino

Crystal Oscilator Investigation – Stories From The Materials And Electrical Components Lab

The lab is an impartial authority – decades of accumulated experience to back up project teams, equipped to carry out a wide variety of tests inhouse, or turn to a network of external facilities when required.

The Materials and Electrical Components lab supports ESA projects through all stages of development, including on-orbit troubleshooting. Accuracy is very important, and so is speed: It aims to schedule critical activities to keep projects on track. It also carries out its own verification of industrial work contributing to a project, and can advise on improving manufacturing processes as needed. The lab can also advise on non-ESA space projects depending on its availability.

Preventative work now, down on the ground, is important to ensure mission success and to minimise risks. Failure really isn’t an option for spacecraft and launchers beyond a set range of redundant systems – to work as planned, the component parts going into a mission have to perform perfectly. The lab’s work gives confidence this will indeed be the case.

The lab’s various specialists join forces to generate synergies: Materials and processes experts assess how the spacecraft is put together, with what materials, and in what way. Then the electrical component experts assess the functioning of the electrical, electronic and electro-mechanical components, the fundamental building blocks of a space mission.